americanalloyflange INCONEL® ALLOY FLANGES

INCONEL® FLANGES

Inconel® is a family of austenite nickel-chromium-based superalloys. The name is a trademark of Special Metals Corporation, a wholly owned subsidiary of Precision Castparts Corp.

Inconel® alloys are oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel® forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy.

THE FOLLOWING ALLOYS ARE AVAILABLE FROM AMERICAN ALLOY FLANGE:

Inconel® Flanges
* ALLOY 600 N06600 B366 (REF), B/SB 564, AMS 5665 B/SB 166
* ALLOY 601 N06601 AMS 5715 B/SB 166
* ALLOY 625 N06625 B366 (REF), B/SB 564, AMS 5666 B/SB 446

Alloys listed above are available from ½” – 50″ We also offer these grades from other mills and will not carry the ® registered brand. Please specify if your application requires specific mill melt sourcing.

* MATERIALS IN STOCK
1 – Registered Trademark of Outokumpu Corp.
2 – Registered Trademark of Allegheny Ludium Corp.
3 – Registered Trademark of Carpenter Tech.
4 – Registered Trademark of Haynes International
5 – Registered Trademark of Special Metals Corp
6 – Registered Trademark of Sandvik Steel

For a full listing of all available alloys, please visit our alloys page.

BUTT-WELD PIPE FITTINGS

American Alloy Flange is a division of South Coast Industrial Metals. We offer stock from Los Angeles, CA 3003H112, 5086H32 & 6061T6 Fittings from ½” – 8″ Long Radius 90’s, Long Radius 45’s, Long Radius 180’s, Short Radius 90’s, Short Radius 180’s, Tees (Straight and Reducing) Tees and Crosses (Straight and Reducing) Caps, Concentric Reducers, Eccentric Reducers, Laterals and Wyes (Straight and Reducing) We also offer 10″ – 50″ custom manufactured fittings, flanges and pipe. For more information, please contact us: RFQ@scimetals.com :: (949) 218-0026

We also offer other alloys from our Alloy Pipe Fittings Division:

Available from stock 1/2′ – 8″ : Inconel®, Incoloy®, Monel®, Hastelloy®, Titanium, Stainless Steel, Duplex & Super Duplex, Aluminum & Chrome

Nickel: 200, 400, 600, 625, 800/H/HT, 825, Alloy 20, Duplex 2205, 2507, C-276, 686, G-2, B-2,
B-3®, C-4, C-22®, C-2000®,
Stainless: 304/H, 304/L, 309, 310, 316/L, 316/H, 321/H, 347/H, 330, 410, 904/L, 254SMO®,
Al-6XN.
Duplex and Super Duplex: F51 – 2205, F53 – 2507, F55 – Alloy 100, F61 Ferralium 255
Chrome: P-11 Cl. 1-3, P12 Cl 1-2, P22 Cl 1, 3, P9, P91
Titanium: Gr 2